SYNERGISTIC EFFECTS OF NANO-SIILICA, FLY ASH, AND GGBS ON MECHANICAL AND DURABILITY PERFORMANCE OF RECYCLED AGGREGATE M30 CONCRETE
DOI:
https://doi.org/10.62643/Keywords:
M30 concrete; recycled coarse aggregate; fly ash; GGBS; nano-silica; workability; split tensile strength; flexural strength; durabilityAbstract
Concrete is widely used in construction, but its production places considerable demand on natural aggregates and ordinary Portland cement. Demolition activities also generate large quantities of concrete waste, while industrial by-products such as fly ash and ground granulated blast-furnace slag (GGBS) can be used as supplementary cementitious materials. This study investigated the combined use of fly ash, GGBS, nano-silica and recycled coarse aggregate (RCA) in M30-grade concrete. The investigation focused on their influence on workability, mechanical strength and selected durability characteristics. Five mixtures, designated M0 to M4, were considered. M0 was the control mixture. In M1 to M4, fly ash and GGBS were each used at 2.5%, 5%, 7.5% and 10% of the reference cement mass, respectively. Nanosilica was varied at 1.5%, 3%, 4.5% and 6%, while RCA replaced 15%, 30%, 40% and 50% of natural coarse aggregate by mass. Workability was assessed using slump and compaction-factor tests. The hardened-concrete programme included compressive, split tensile and flexural strength tests at the stated curing ages. Acid, alkaline and sulphate exposure tests were also reported. The recorded results showed a reduction in slump as the replacement levels increased, while the compaction factor rose slightly across the mixtures. The highest 28-day split tensile value in the presented table occurred in M2, whereas the highest 28-day flexural value occurred in M3. The durability tables indicate increasing strength loss with increasing replacement level. These results show that the best-performing mixture depends on the property being considered; the available results do not establish M3 as the optimum for every property. The findings are limited to the materials, proportions and test data reported in this investigation
Downloads
Published
Issue
Section
License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.













